Trunk Lid Panel - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

Exterior Body Panels

8. Trunk Lid Panel

1. TRUNK LID

S913365A1801

1) Open trunk lid.

2) Disconnect trunk lid connector.

3) Loosen trunk lid mounting bolts to remove trunk

lid from hinges.

2. TORSION BAR

S913365A1802

1) Open trunk lid.

2) Using special tool, remove torsion bar from

ST 927780000 REMOVER

During removal and installation, carefully

handle torsion bar. It will generate reactive

3) Remove right/left torsion bars.

After the torsion bar is removed, the trunk lid

will slam shut. Be careful not to get hit by the

TRUNK LID PANEL

B: INSTALLATION

1. TRUNK LID

S913365A1101

1) Install in the reverse order of removal.

2) Install trunk lid with uniform clearance.

2. TORSION BAR

S913365A1102

1) Install in the reverse order of removal.

2) Apply grease to rotating area of hinges and

mating surface of torsion bar.

Tightening torque:

14 N·m (1.4 kgf-m, 10 ft-lb)

Table of Contents