Subaru Legacy 2002 Service Manual page 3028

REAR DOOR LATCH ASSEMBLY
Security and Locks
10. Rear Door Latch Assembly
S909320
A: REMOVAL
S909320A18
1) Disconnect ground cable from battery.
2) Remove the rear door trim. <Ref. to EI-31,
REMOVAL, Rear Door Trim.>
3) Remove the sealing cover. <Ref. to EB-17,
REMOVAL, Rear Sealing Cover.>
4) Remove the rear inner remote. <Ref. to SL-23,
REMOVAL, Rear Inner Remote.>
5) Remove the three screws and bolt.
B5M1001
6) Disconnect the connector. Remove the rear
door latch assembly.
B: INSTALLATION
S909320A11
Install in the reverse order of removal.
NOTE:
Make sure the lock works properly after installa-
tion.
C: INSPECTION
S909320A10
1) Make sure the rod is not deformed.
2) Make sure the lever and rod work smoothly.
SL-25