Subaru Legacy 2002 Service Manual page 3029

Security and Locks
11. Rear Door Lock Actuator
A: REMOVAL
S909323A18
1) Remove the rear door latch assembly. <Ref. to
SL-25, REMOVAL, Rear Door Latch Assembly.>
2) Remove the bolt. Remove the rear door lock
actuator.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure the lock works properly after installa-
tion.
C: INSPECTION
1) Disconnect the door lock actuator harness con-
nector.
2) Connect the battery to the door lock actuator
terminals.
Terminal No.
No. 2 (+) and No. 4 (–)
No. 4 (+) and No. 2 (–)
If NG, replace the door lock actuator.
REAR DOOR LOCK ACTUATOR
B5M1002
S909323A11
S909323A10
B6M0135
Actuator operation
Unlocked → Locked
Locked → Unlocked
S909323
SL-26