Front Hood - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

Exterior Body Panels

2. Front Hood

1) Open front hood to remove washer nozzles.

2) Release clips to remove hood insulator.

3) Remove bolts to disconnect hood from hinges.

B: INSTALLATION

1) Install in the reverse order of removal.

2) Adjust clearance between hood and fender.

Clearance must be equal at both sides.

Tightening torque:

24.5 N·m (2.5 kgf-m, 18 ft-lb)

C: ADJUSTMENT

1) Use hinge mounting holes to align front hood

longitudinally and laterally.

2) Adjust height at front end of hood. <Ref. to

SL-31, ADJUSTMANT, Front Hood Lock Assem-

3) Rotate hood buffer to adjust lateral height.

Table of Contents