KEYLESS ENTRY CONTROL MODULE
Security and Locks
22. Keyless Entry Control
Module
S909324
A: REMOVAL
S909324A18
1) Disconnect ground cable from battery.
2) Remove glove box. <Ref. to EI-32, REMOVAL,
Glove Box.>
3) Remove nut, then remove keyless entry control
module (B) and the other electrical control module
(A) while disconnecting connector.
B5M1181A
4) Disconnect keyless entry control module and
the other electrical control module.
B: INSTALLATION
S909324A11
Install in the reverse order of removal.
SL-37