REAR GATE OUTER HANDLE
Security and Locks
12. Rear Gate Outer Handle
S909626
A: REMOVAL
S909626A18
1) Remove the rear gate lower trim. <Ref. to
EI-47, REMOVAL, Rear Gate Trim.>
2) Remove the rear gate latch rod.
3) Remove the nut holding the rear gate outer
handle, and then remove the rear gate outer
handle.
B5M1116
B: INSTALLATION
S909626A11
Install in the reverse order of removal.
NOTE:
Make sure the outer handle works properly after
installation.
C: INSPECTION
S909626A10
1) Inspect the rod for deformation.
2) Make sure the lever and rod move smoothly.
SL-27