Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
7.3
Global ASM settings
The global ASM settings are on the ASM properties bar in DCA and are identical for all ASMs. For this
reason the settings are described once below as an example.
7.3.1
General
Name
Name of the ASM; the name can be selected as required. It is used for the display of the ASM on the web
user interface as well as to name the group objects and the BACnet objects.
Description
Enter in this text field any notes and comments on the ASM. This description is only displayed at this point
and nowhere else.
Reinstall
Options:
After the successful download of an ASM to the device, the parameters for the ASM are locked against
changes in ETS. If parameters need to be changed, the ASM must be reinstalled; undertake this action by
selecting the checkbox. In this way the parameters can be changed again and the ASM is reinstalled on
the device with the next download. See
72 2CDC508198D0211 Rev. A | AC/S 1.x.1
No (checkbox cleared)
Yes (checkbox selected)
chapter 6.5.11, Download
reaction.
Advertisement
Table of Contents
