ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 360

®
ABB i-bus KNX
Parameters
Object function
Input: Pump B operating status (Off/On)
The module has this group object if the Yes option is selected for the
for the
Input for the operating status (Off/On) provided by the second pump. On pumps with their own control, this operating status
can differ from the operating status of the cooling distribution circuit controller.
Telegram value:
Input: Pump B relay status
The module has this group object if the Yes option is selected for the
Input for the status of the second pump from the cooling distribution circuit controller.
Telegram value:
Output: Control On/Off
The module has this group object in the following conditions:
•
If the Yes option is selected for the
cooling circuit control based on ASM input socket
•
If the Yes option is selected for the
The cooling distribution circuit controller is switched on/off via this group object based on the calculations in the module.
Telegram value:
360 2CDC508198D0211 Rev. A | AC/S 1.x.1
Pump display operating status parameter.
0 = Inactive
1 = Active
0 = Off
1 = On
0 = Off
1 = On
Name (can be changed separately)
Cooling distribution circuit
Double pump
Cooling distribution circuit
Double pump
Cooling distribution circuit
Supply temperature control parameter and the Yes option is selected for the
parameter.
Switch off if no room demand parameter.
Data type Flags
1 bit C, W, T
DPT 1.011
parameter and the Yes option is selected
1 bit C, W, T
DPT 1.001
parameter.
1 bit C, R, T
DPT 1.001
Enable