Table of Contents
Advertisement
®
ABB i-bus
KNX
Commissioning
6.5.10
Project verification
The Project Verification function states what is utilized on the device. For example the number of ASMs
used, KNX group objects or BACnet objects.
If a limit is reached, an error message is displayed and the action is not undertaken. You can check the
utilization of the device at any time using this function
6.5.11
Download reaction
Download the device parameters using the ETS function Download.
ETS automatically saves the changes in the ETS project at regular intervals and on leaving DCA. If
changes to the project have not yet been saved, the following message is displayed:
If this message is displayed and you want to program the device (download), please first click "Save",
otherwise the latest configuration will not be loaded into the device.
A fast download to the device is possible using the device's Ethernet interface, if the ETS function Direct IP
connection is activated in the ETS settings. Otherwise download is via the device's KNX TP interface. Due
to the long time the download will take, this method is not recommended.
6.5.12
Copying, exchanging and converting
The "ABB Update Copy Convert" ETS application from the KNX online shop cannot be used to copy or
exchange parameter settings or to convert the application version. Instead see
cutting and
Note
pasting.
chapter 6.5.8, Copying,
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 55
Advertisement
Table of Contents
