ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 257

®
ABB i-bus KNX
Parameters
Pump
Settings for the heating distribution circuit's pump.
Double pump
Options:
This parameter specifies whether a double pump or a single pump is used in the heating distribution
circuit. The group objects, BACnet objects, ASM sockets and the depiction on the web user interface are
adjusted to suit the setting.
Override by WebUI
Options:
If this function is activated, the pump can be overridden via the web user interface. For this purpose
additional group objects are displayed that must be connected to the heating distribution circuit controller.
Pump display operating status
Options:
If the pump outputs its operating status (Off/On), this status can be received by a group object via this
function and output on the web user interface, in a BACnet object and on the ASM socket.
No (checkbox cleared)
Yes (checkbox selected)
No (checkbox cleared)
Yes (checkbox selected)
No (checkbox cleared)
Yes (checkbox selected)
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 257