Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
7.12.5
BACnet objects
Type
Input
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
BACnet input objects
Object name
Chiller: Supply setpoint temperature External specification
This module has this BACnet input object if the Yes option is selected for the
BACnet input object option is selected for the
Input for the specification of the supply setpoint temperature. The value is sent by the module to the chiller via the related
group object. This supply setpoint temperature specified via BACnet can be overridden manually on the web user interface.
Signal value:
392 2CDC508198D0211 Rev. A | AC/S 1.x.1
Object name
Chiller: Supply setpoint temperature External specification
Chiller: Return temperature
Chiller: Supply temperature
Chiller: Supply setpoint temperature status
Chiller: Outside temperature
Chiller: Supply setpoint temperature override status
Chiller: Supply setpoint temperature External specification
Chiller: Chiller On/Off
Chiller: Control On/Off override disable/enable
Chiller: Chiller operating status
Chiller: Chiller fault status
Chiller: Room control values
Chiller: Pump override disable/enable
Chiller: Pump override value
Chiller: Pump operating status (Off/On)
Chiller: Pump relay status
Chiller: Pump fault
Chiller: Pump repair switch status
-273...670760 °C
Supply setpoint temperature source
Object type
Unit
Analog value
°C (62)
Analog value
°C (62)
Analog value
°C (62)
Analog value
°C (62)
Analog value
°C (62)
Binary value
-
Analog value
°C (62)
Binary value
-
Binary value
-
Binary value
-
Binary value
-
Analog value
% (98)
Binary value
-
Binary value
-
Binary value
-
Binary value
-
Binary value
-
Binary value
-
Object type
Unit
Analog value
°C (62)
Supply temperature control
parameter and the
parameter.
COV send
condition
-
1.0
1.0
1.0
1.0
-
1.0
-
-
-
-
1.0
-
-
-
-
-
-
COV send
condition
-
Advertisement
Table of Contents
