ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 135

®
ABB i-bus KNX
Parameters
Function Block Output (FB OUT)
Output for a user-defined function block. If you wish to use the same logic several times, you can combine
and save it in a function block. In this case the function block output is used instead of an output socket.
Outputs
No. DPT
1
Parameters
Name
Short
description
Full
description
Index
Abbr.
Any E
Value
According to DPT Always
According to DPT Always
According to DPT Always
Name Visible
Input Always
Visible Description
Default: A
Default: Output
Default: 0
Description
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 135