ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 449

®
ABB i-bus KNX
Parameters
Initial values
Initial value
Options:
This parameter specifies which value is output in the group object and on the ASM output socket if no
value switching times have been parameterized via BACnet. For example, after downloading the module
to the application controller.
Properties panel BACnet, Calendar
Activated
Options:
In the BACnet parameter window for this module you can activate a BACnet calendar object on the
BACnet interface. This BACnet calendar object can be used to define an additional exception calendar and
to link this to any BACnet scheduler in the BACnet system.
You will find further descriptions on the settings in the BACnet parameter window in
BACnet.
Off
On
No (checkbox cleared)
Yes (checkbox selected)
chapter 7.3.2,
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 449