ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 211

®
ABB i-bus KNX
Parameters
Object function
Input: Fan coil unit, valve cooling
The module has this group object if the 2-pipe cooling option or the 4-pipe heating + cooling option is selected for the
unit parameter.
Input for the valve position (control value) on the fan coil unit for cooling.
Telegram value:
Input: Fan coil unit, valve
The module has this group object if the 2-pipe heating/cooling option is selected for the
Input for the valve position (control value) on the fan coil unit. This is for either heating or cooling depending on the
heating/cooling operating type.
Telegram value:
Input: Fan coil unit, fan speed
The module has this group object if any option except None is selected for the
is selected for the
Input for the fan speed on the fan coil unit.
Telegram value:
Input: Fan coil unit, fan manual
The module has this group object if any option except None is selected for the
is selected for the
Input for the connection of the status from the room thermostat as to whether the current fan speed has been adjusted
manually by a user or it was calculated automatically by the room thermostat.
Telegram value:
0...100%
0...100%
Fan coil unit, fan speed parameter.
0...100%
Fan coil unit, fan speed parameter.
0 = Automatic
1 = Manual
Name (can be changed
separately)
Room
Room
Room
Fan coil unit
Room
Fan coil unit
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 211
Data type Flags
1 byte C, W, T, U
DPT 5.001
Fan coil
1 byte C, W, T, U
DPT 5.001
Fan coil unit parameter.
1 byte C, W, T, U
DPT 5.001
parameter and the Display option
1 bit C, W, T, U
DPT 1.011
parameter and the Display option