ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 317

®
ABB i-bus KNX
Parameters
Object name
Room involvement
The module has this output socket if the Yes option is selected for the
weather compensated option is selected for the
for the
Outputs of current value by which the supply setpoint temperature is increased or reduced by the Room involvement function.
Signal value:
Max. room setpoint temperature
This module has this output socket if the Yes option is selected for the
weather compensated option is selected for the
room setpoint temperatures option is selected for the
Outputs the highest room setpoint temperature that is present on the ASM input socket and that is used by the Economy mode
function.
Signal value:
Heat generator operating status
The module has this output socket if the Yes option is selected for the
Outputs the operating status (Off/On) provided by the heat generator. Due to the control integrated into the heat generator,
this status may differ from the operating status specified by this module.
Signal value:
Heat generator failure status
The module has this output socket if the Yes option is selected for the
Outputs the fault status provided by the heat generator.
Signal value:
Room involvement parameter.
-670760...670760 K
-273...670760 °C
0 = Off
1 = On
0 = Off
1 = On
Supply temperature control
Supply setpoint temperature source
Supply temperature control
Supply setpoint temperature source
Economy mode parameter.
Show operating status
Show fault status
Data type
DPT 9.002
parameter, the Calculated
parameter and the Yes option is selected
DPT 9.001
parameter, the Calculated
parameter and the Based on the current
DPT 1.001
parameter.
DPT 1.001
parameter.
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 317