Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
418 2CDC508198D0211 Rev. A | AC/S 1.x.1
Date tab:
Here you can set an exception for a day or for a contiguous sequence of days that is applied once
in the period parameterized.
To add an exception for a day, select the required month using the arrow buttons and click the
required day using the left mouse button. The selection is marked in blue and is displayed in the
two date fields as the start and end date for the exception.
To add an exception for a contiguous sequence of days, select the required month using the arrow
buttons and click the required start day and then the required end day. The selection is marked in
blue and is displayed in the two date fields as the start and end date for the exception. Alternatively,
you can enter the start and end date directly in the date fields. Programming over several months is
possible.
Yearly tab:
Here you can set an exception for a day or for a contiguous sequence of days that is applied every
year. Program the exception using the procedure described for the Date tab. Programming over
several months is possible.
The exception is applied every year until it is deleted.
Monthly tab:
Here you can set an exception for a day or for a contiguous sequence of days that is applied every
month. Program the exception using the procedure described for the Date tab. Programming over
several months is not possible.
The exception is applied every month until it is deleted.
Advertisement
Table of Contents
