ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 105

®
ABB i-bus KNX
Parameters
Division (DIV)
Divides one input value (dividend) by another (divisor).
Inputs
No.
1
2
Outputs
No.
1
2
3
Parameters
None
Function
Whenever a telegram is received the output starts a recalculation independently if the value has changed.
An overflow will occur if the value from the
•
If the value from the
o
o
o
•
If the value from the
o
o
o
•
If the value from the
o
o
o
•
Value of the divisor = 0:
o
o
o
Other
Inputs not connected are treated as if they did not exist.
DPT Abbr.
8 bits or higher Dev
Same as input 1 Dor
DPT Abbr.
Same as input 1 Q
1 bit Ü
1 bit F
division is greater than the maximum DPT value:
Q = 0
Ü = 1 (true)
F = 0 (false)
division is less than the minimum DPT value:
Q = 0
Ü = 1 (true)
F = 0 (false)
division is within the valid range of the DPT:
Q = Quotient of the two input values (dividend: divisor)
Ü = 0 (false)
F = 0 (false)
Q = 0
Ü = 0 (false)
F = 1 (true)
Name Visible
Dividend Always
Divisor Always
Name Visible
Quotient Always
Overflow Always
Error Always
division is outside the DPT range:
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 105
Description
Description
Indicates an overflow
Indicates a division by 0