Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
Delay (DELAY)
Values received are forwarded after a defined delay.
Inputs
No.
1
2
Outputs
No.
1
Parameters
Name
Delay
If the Delay checkbox is selected, the time value field is not visible.
Function
If a new value is received during the delay, the delay restarts and the old value is discarded.
The timer resets to zero and restarts (retrigger).
Once the delay has elapsed, the output is updated to the last input value.
On enabling the delay using the checkbox, note the following:
•
If input D is not connected, the delay will automatically be set to 0.
DPT
Abbr.
Any
E
4 bytes signed
D
DPT
Abbr.
Any
A
Value
Checkbox
hh:mm:ss Default value:
00:00:00
Name
Visible
Input
Always
Delay
Parametrizable
Name
Visible
Output
Always
Visible
Always
If the checkbox is
cleared
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 107
Description
Value in seconds;
according to KNX DPT
13.100
Description
Description
Enables input D (Delay)
Parameter and socket
according to KNX DPT
13.100.
Range from 00:00:00 to
99:59:59.
Values outside the range
are set to the minimum or
maximum value
respectively.
Advertisement
Table of Contents
