Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
7.14
Operating mode Scheduler WebUI ASM
7.14.1
General
This application-specific automation module (ASM) is a timer for the HVAC operating mode (Comfort,
Standby, Economy, Building Protection). The switching times are parametrized via the web user interface.
Switching commands can be set to the minute for each weekday, and exceptions (e.g. for holidays) can be
defined on a weekly, monthly and yearly basis.
The application controller outputs the switching command on the KNX bus, on the ASM output socket and
on BACnet.
It is essential the clock in the application controller is set to operate this module.
7.14.2
Settings
General
You will find descriptions of the global settings (Name, Description, Reinstall, BACnet, WebUI) in
7.3, Global ASM
410 2CDC508198D0211 Rev. A | AC/S 1.x.1
Note
settings.
chapter
Advertisement
Table of Contents
