®
ABB i-bus
KNX
Parameters
Recurrence section parameters – Monthly
Recurrence cycle in months.
The day of the month on which an event should be triggered every x months.
Parameter name
Day ... of every
... month(s)
Day ... of every starts from the date set in the Duration section.
118 2CDC508198D0211 Rev. A | AC/S 1.x.1
Value
1...31, default = 1
1...500, default = 1
Note
Description
The element is activated on a specific day in a
specific month, e.g. every 3rd day of the month
The element is activated in specific months, e.g.
every 3rd month