ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 168

®
ABB i-bus KNX
Parameters
168 2CDC508198D0211 Rev. A | AC/S 1.x.1
Using the Aggregate function it is possible to connect several output sockets to one input socket at
the same time. As a result there are several different signals on the input socket. This setting
specifies the related calculation function necessary
This function is shown graphically as appropriate on the input socket in the Linking view.
Depending on the selection, the data point types (DPT) available may be restricted. See following
parameters.
•
None: No Aggregate function. Only one output socket can be connected to the ASM input
socket.
•
Max.: The highest value currently present on the input socket is used.
•
Min.: The lowest value currently present on the input socket is used.
•
Avg: The average of all values currently present on the input socket is calculated and used.