Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
Click the Create exception
Click the Cancel
The exception switching times can overlap. In this situation the exception switching time that is positioned
the highest on the list
switching time, holding the mouse button pressed and dragging (drag & drop).
You can delete an exception by clicking
You can copy the settings for an exception to another exception by clicking the
mouse button pressed and dragging to the required destination exception (drag & drop).
Weekly tab:
Here you can set an exception for a day or for a contiguous sequence of days that is applied
repeatedly within the date range set.
Program the exception using the procedure described for the Date tab. Programming over several
months is possible.
Use the Repeat every xxx Week(s) field to set the frequency with which the exception programmed
is to be applied (weekly, 2-weeks, etc.). The count always starts from the start date. The blue
marking on the calendar is changed to suit the repetition selected.
By default the exception programmed here applies to all days of the week; if you clear the checkbox
in the weekday bar, individual days can be excluded from the exception. The blue marking on the
calendar is changed to suit.
button to save the exception; the programming is then active.
button to cancel the addition of the exception.
applies. The exception switching times can be dragged in the list by clicking the
.
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 441
icon and keeping the
Advertisement
Table of Contents
