®
ABB i-bus
KNX
Parameters
Interfaces
The operating modes necessary for the application can be selected in the following by selecting the
checkboxes. For each operating mode activated
•
An adjustable room setpoint temperature is displayed on the web user interface
•
An initial room setpoint temperature is displayed in the Initial values parameter window
•
An ASM output socket is displayed
•
A group object is displayed
•
A BACnet object is displayed
Cooling Building Protection
Options:
Cooling Economy
Options:
Cooling Standby
Options:
Cooling Comfort
Options:
Heating Comfort
Options:
Heating Standby
Options:
Heating Economy
Options:
Heating Building Protection
Options:
No (checkbox cleared)
Yes (checkbox selected)
No (checkbox cleared)
Yes (checkbox selected)
No (checkbox cleared)
Yes (checkbox selected)
No (checkbox cleared)
Yes (checkbox selected)
No (checkbox cleared)
Yes (checkbox selected)
No (checkbox cleared)
Yes (checkbox selected)
No (checkbox cleared)
Yes (checkbox selected)
No (checkbox cleared)
Yes (checkbox selected)
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 231