Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
Input sockets
Object name
Control On/Off Heating/cooling distribution circuit controller control
This module has this input socket if the Yes option is selected for the
option is selected for the
The heating distribution circuit controller's control connected can be switched on and off by another module via this input. This
is a multiple input socket on which the input signals are linked via an OR operator.
Signal value:
Supply setpoint temperature External specification
This module has this input socket if the Yes option is selected for the
input socket option is selected for the
Specification of the supply setpoint temperature by another module. This value is output in the corresponding group objects to
the heating distribution circuit controller linked.
The value can be affected by the Max. supply temperature and Supply setpoint temperature offset parameters in the
module.
Signal value:
Outside temperature
This module has this input socket if the Yes option is selected for the
Calculated weather compensated option is selected for the
Input for the outside temperature. The supply setpoint temperature is calculated by the module from the heating curve based
on this value.
Signal value:
Enable heating distribution circuit control based on ASM input socket
0 = Off
1 = On
Supply setpoint temperature source
Note
-273...670760 °C
-273...670760 °C
Data type
DPT 1.001
Supply temperature control
DPT 9.001
Supply temperature control
parameter.
DPT 9.001
Supply temperature control
Supply setpoint temperature source
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 261
parameter and the Yes
parameter.
parameter and the ASM
parameter and the
parameter.
Advertisement
Table of Contents
