Group Objects - ABB i-bus KNX AC/S 1.x.1 Series Product Manual

®
ABB i-bus KNX
Parameters
7.5.4

Group objects

The ASM can only ever transmit/receive one value and therefore has only one group object. Depending on
the template selected, this is an input, output or input/output.
The data point type is also dependent on the parameterization of the ASM.
Object function
Input: Value
In-/Output: Value
Output: Value
Object function
Input: Value
The module has an input group object if the
configurable
Input for the KNX value for output on the parameterized interfaces.
Telegram value:
In-/Output: Value
The module has an input/output group object if the
Freely configurable
Input for the KNX value for output on the parameterized interfaces. Updated values from other interfaces are output again via
this group object.
Telegram value:
Output: Value
The module has an output group object if the
selected with the KNX: Output parameter.
The current value from the parameterized interfaces is output via this group object.
Telegram value:
Name (can be changed
separately)
Value
Value
Value
template is selected with the KNX: Input parameter.
Configuration-dependent
template is selected with the KNX: Input + output parameter.
Configuration-dependent
Configuration-dependent
Data point type (DPT)
Configuration-dependent
Configuration-dependent
Configuration-dependent
Name (can be changed separately)
Value
KNX to WebUI, KNX to BACnet,
Value
WebUI to KNX with update,
Value
WebUI to KNX, BACnet to KNX
Length Flags
C R W T
Configuration- x
dependent
Configuration- x
dependent
Configuration- x
dependent
Data type
Configuration-
dependent
KNX to ASM output socket template or the
Configuration-
dependent
BACnet to KNX with update template or the
Configuration-
dependent
template or the Freely configurable
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 177
U I
x x
x x x
x x
Flags
C, W, T
Freely
C, R, W, T
C, R, T
template is