ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 145

®
ABB i-bus KNX
Parameters
Read value at startup
Options:
•
No (checkbox cleared): The module behaves passively after the start and waits until it receives a new
value in the group object.
•
Yes (checkbox selected): After a start, the module actively requests the current value via the group
object using a KNX Value Read telegram.
Initial values
Initial value
This parameter defines the value that is output after downloading the module. This value is output on the
web user interface and the ASM socket until a new value in the group object overwrites it.
The value range is dependent on the data point type set.
No (checkbox cleared)
Yes (checkbox selected)
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 145