Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
Object function
Input: Pump A fault
The module has this group object if the Yes option is selected for the
The fault state of the pump can be received via this group object and evaluated by the device
Telegram value:
Input: Pump A operating status (Off/On)
The module has this group object if the Yes option is selected for the
Input for the operating status (Off/On) provided by the pump. On pumps with their own control, this operating status can differ
from the operating status of the cooling distribution circuit controller.
Telegram value:
In-/Output: Pump A override
disable/enable
The module has this group object if the Yes option is selected for the
This object activates/deactivates the pump override for the cooling distribution circuit controller.
Telegram value:
In-/Output: Pump A override value
The module has this group object if the Yes option is selected for the
This object specifies the state with which the pump for the cooling distribution circuit is overridden if the pump override is
active.
Telegram value:
358 2CDC508198D0211 Rev. A | AC/S 1.x.1
Name (can be changed separately)
Cooling distribution circuit
0 = Inactive
1 = Active
Cooling distribution circuit
0 = Inactive
1 = Active
Cooling distribution circuit
0 = Disabled
1 = Enabled
Cooling distribution circuit
0 = Off
1 = On
Data type
1 bit
DPT 1.011
Pump display pump fault status
1 bit
DPT 1.011
Pump display operating status
parameter.
1 bit
DPT 1.003
Override by WebUI
parameter.
1 bit
DPT 1.001
Override by WebUI
parameter.
Flags
C, W, T
parameter.
C, W, T
C, R, W, T
C, R, W, T
Advertisement
Table of Contents
