Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
Object name
Heating distribution circuit: Pump B fault
The module has this BACnet output object if the Yes option is selected for the
selected for the
Outputs the fault status provided by the second pump.
Signal value:
Heating distribution circuit: Pump B repair switch status
The module has this BACnet output object if the Yes option is selected for the
selected for the
Outputs the contact position provided by the second pump repair switch.
Signal value:
Heating distribution circuit: Valve control value
The module has this BACnet output object if the 3-way valve (mixing valve) option or the 2-way valve option is selected for the
Valve type
Outputs the valve control value for the heating distribution circuit. This value is received from the heating distribution circuit
controller linked via the related module group object.
Signal value:
Heating distribution circuit: Valve override disable/enable
The module has this BACnet output object if the 3-way valve (mixing valve) option or the 2-way valve option is selected for the
Valve type
Outputs whether the override of the heating distribution circuit's valve is active or inactive.
Signal value:
284 2CDC508198D0211 Rev. A | AC/S 1.x.1
Pump display pump fault status
0 = Inactive
1 = Active
Display pump repair switch status
0 = Inactive
1 = Active
parameter.
0...100%
parameter and the Yes option is selected for the
0 = Disabled
1 = Enabled
Double pump
parameter.
Double pump
parameter.
Valve override disable/enable
Object type
Unit
Binary value
-
parameter and the Yes option is
Binary value
-
parameter and the Yes option is
Analog value
% (98)
Binary value
-
parameter.
COV send
condition
-
-
1.0
-
Advertisement
Table of Contents
