Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
ASM input socket to KNX
The value received on the ASM input socket is sent by the group object using this template. A value from
the KNX bus does not update this value. The value is also output on the web user interface.
The settings for the ASM socket, web user interface, KNX and BACnet are set automatically as follows:
ASM socket:
WebUI:
KNX:
BACnet:
Aggregate function
Options:
Using the Aggregate function it is possible to connect several output sockets to one input socket at the
same time. As a result there are several different signals on the input socket. This setting specifies the
related calculation function necessary
This function is shown graphically as appropriate on the input socket in the Linking view.
Depending on the selection, the data point types (DPT) available may be restricted. See following
parameters.
160 2CDC508198D0211 Rev. A | AC/S 1.x.1
Input
Display
Output to KNX
None
None
Max
Min
Avg
Or
And
Advertisement
Table of Contents
