Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
Object name
Chiller: Supply setpoint temperature External specification
This module has this BACnet input object if the Yes option is selected for the
ASM input socket option is selected for the
Outputs the supply setpoint temperature specified via the ASM input socket. This status does not take into account any
possible override of the supply setpoint temperature via the web user interface.
Signal value:
Chiller: Chiller On/Off
The module has this BACnet output object in the following conditions:
•
If the Yes option is selected for the
chiller based on ASM input socket
•
If the Yes option is selected for the
Outputs the on/off status of the chiller that is sent to the chiller via the related group object. The state is dependent on the
Enable chiller based on ASM input socket and Switch off if no room demand functions as well as override via the web user
interface.
Signal value:
Chiller: Control On/Off override disable/enable
The module has this BACnet output object in the following conditions:
•
If the Yes option is selected for the
chiller based on ASM input socket
•
If the Yes option is selected for the
Outputs whether the control (Off/On) for the chiller has been overridden via the web user interface.
Signal value:
394 2CDC508198D0211 Rev. A | AC/S 1.x.1
Supply setpoint temperature source
-273...670760 °C
Supply temperature control
parameter.
Switch off if no room demand
0 = Off
1 = On
Supply temperature control
parameter.
Switch off if no room demand
0 = Not overridden
1 = Overridden
Object type
Analog value
Supply temperature control
parameter.
Binary value
parameter and the Yes option is selected for the
parameter.
Binary value
parameter and the Yes option is selected for the
parameter.
Unit
COV send
condition
°C (62)
1.0
parameter and the
-
-
Enable
-
-
Enable
Advertisement
Table of Contents
