ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 103

®
ABB i-bus KNX
Parameters
Multiplication (MULT)
Multiplies up to 16 input values.
Inputs
No.
1
2
3-16
Outputs
No.
1
2
Parameters
Name
Input count
Function
Whenever a telegram is received the output starts a recalculation independently if the value has changed.
An overflow will occur if the value from the
•
If the
o
o
•
If the value from the
o
o
•
If the value from the
o
o
Other
Inputs not connected are treated as if they did not exist.
DPT Abbr.
8 bits or higher Mul
Same as input 1 M
Same as input 1 M
DPT Abbr.
Same as input 1 P
1 bit Ü
Value
2...16
multiplication is greater than the maximum DPT value:
P = 0
Ü = 1 (true)
multiplication
P = 0
Ü = 1 (true)
multiplication
P = Product of all linked input values
Ü = 0 (false)
Name Visible
Multiplicand Always
Multiplier Always
1
Multiplier Parametrizable
n
Name Visible
Product Always
Overflow Always
Visible
Always
multiplication is outside the DPT range:
is less than the minimum DPT value:
is within the valid range of the DPT:
Description
n = 2...15
Description
Indicates an overflow
Description
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 103