®
ABB i-bus
KNX
Parameters
7.5
Value ASM
7.5.1
General
This application-specific automation module (ASM) can exchange any data between the various interfaces
on the application controller (KNX, BACnet, web user interface and ASM sockets).
You can select predefined templates in the ASM settings for the most frequent situations.
Only one value can be transferred per module. The data point type used can be selected as required.
7.5.2
Settings
General
You will find descriptions of the global settings (Name, Description, Reinstall, BACnet, WebUI) in
7.3, Global ASM
142 2CDC508198D0211 Rev. A | AC/S 1.x.1
settings.
chapter