®
ABB i-bus
KNX
Parameters
Object name
Heat generator: Pump fault
The module has this BACnet output object if the Yes option is selected for the
Outputs the fault status provided by the pump.
Signal value:
Heat generator: Pump repair switch status
The module has this BACnet output object if the Yes option is selected for the
Outputs the contact position provided by the pump repair switch.
Signal value:
0 = Inactive
1 = Active
0 = Inactive
1 = Active
Object type
Unit
Binary value
-
Pump display pump fault status
Binary value
-
Display pump repair switch status
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 329
COV send
condition
-
parameter.
-
parameter.