ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 225

®
ABB i-bus KNX
Parameters
Object name
Room: Cooling ceiling, dew point alarm sensor
The module has this BACnet output object if the On/Off option or the 0...100 % option is selected for the
parameter and the Yes option is selected for the Cooling ceiling, dew point alarm sensor parameter.
Outputs the signal value from the dew point sensor in the cooling ceiling.
Signal value:
Room: Split unit, On/Off
The module has this BACnet output object if the Yes option is selected for the
Outputs the operating status of the split unit.
Signal value:
Room: Split unit, fan speed
Outputs the fan speed in the split unit.
The module has this BACnet output object if the Yes option is selected for the
Signal value:
-273...670760 °C
0 = Off
1 = On
0...100 %
Object type Unit
Binary value -
Binary value -
Split unit parameter.
Analog value % (98)
Split unit parameter.
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 225
COV send
condition
-
Cooling ceiling
-
1.0