ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 51

®
ABB i-bus KNX
Commissioning
The socket data point types used correspond to the data point types (DPT) in the KNX standard and
comprise the main type and the subtype. For further information, see
the mouse over the sockets to display the data point type. The main type is also apparent from the color of
the sockets.
It is only possible to link sockets of the same main type or also subtype.
•
DPT 1.xxx and DPT 1.xxx = OK
•
DPT 1.xxx and DPT 1.001 = OK
•
DPT 1.xxx and DPT 9.xxx = Not possible
•
DPT 1.001 and DPT 1.002 = Not possible
ASM input and output sockets have a + symbol if they are linked to ASMs not currently shown in the
Linking view. Click the + symbol to show these ASMs in the Linking view.
You can hide ASMs from the Linking view using the – symbol in the bar at the top of the ASM.
chapter 4.7, Data point types. Move
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 51