Table of Contents
Advertisement
®
ABB i-bus
KNX
Commissioning
6.5.7
Linking view
In the Linking view you can link together the ASMs for the device-internal exchange of values.
Display the ASMs in the linking view by first selecting them in the workspace and then clicking the button
on the menu bar for opening the Linking view. You can select several ASMs either by clicking them with
the mouse with the Control key on the keyboard pressed, alternatively you can use the Bulk selection
function on the menu bar.
All ASMs selected are displayed on a worksheet in the Linking view. The ASMs are arranged automatically
and you can change the arrangement as required by dragging. DCA saves the last 30 arrangements such
that the recent arrangements can be restored if the same ASMs are selected on opening the Linking view
again. ASMs outside the field of view can be reached by scrolling or changing the zoom setting.
ASM input sockets
The ASM input sockets are displayed in the ASM tiles on the left. The module receives values from
other ASMs via these objects. Every input on an ASM must be linked. It is not allowed to leave an
input unlinked because otherwise the module will be lacking a value for its automation function.
ASMs with unlinked input sockets are marked in the workspace with an exclamation mark in the tile.
ASM input sockets can only be linked to one ASM output socket. Exceptions are ASM multiple
sockets.
Depending on the application, ASM multiple sockets have one of the following aggregate functions
integrated so that several signals can be linked.
•
Selection of maximum
•
Selection of minimum
•
Average calculation
•
OR operator
•
AND operator
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 49
Advertisement
Table of Contents
