Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
BACnet input objects
Object name
Heating distribution circuit: Supply setpoint temperature External
specification
This module has this BACnet input object if the Yes option is selected for the
BACnet input object option is selected for the
Input for the specification of the supply setpoint temperature. The value is sent by the module to the heating distribution circuit
controller via the related group object. This supply setpoint temperature specified via BACnet can be overridden manually on
the web user interface.
Signal value:
BACnet output objects
Object name
Heating distribution circuit: Return temperature
Outputs the current return temperature that is received via the related group object.
Signal value:
Heating distribution circuit: Supply temperature
Outputs the current supply temperature that is received via the related group object.
Signal value:
Heating distribution circuit: Supply setpoint temperature status
The module has this BACnet output object if the Yes option is selected for the
Outputs the current supply setpoint temperature as is sent by this module to the heating distribution circuit controller via the
related group object. The supply setpoint temperature output here is, depending on the settings, either calculated by this
module based on the outside temperature, or specified via an ASM input socket or BACnet and also takes into account any
possible override of the supply setpoint temperature via the web user interface.
Signal value:
Supply setpoint temperature source
-273...670760 °C
-273...670760 °C
-273...670760 °C
-273...670760 °C
Object type
Unit
Analog value
°C (62)
Supply temperature control
parameter and the
parameter.
Object type
Unit
Analog value
°C (62)
Analog value
°C (62)
Analog value
°C (62)
Supply temperature control
parameter.
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 277
COV send
condition
-
COV send
condition
1.0
1.0
1.0
Advertisement
Table of Contents
