®
ABB i-bus
KNX
Parameters
Function Block Input (FB IN)
Input for a user-defined function block. If you wish to use the same logic several times, you can combine
and save it in a function block. In this case the function block input is used instead of an input socket.
Outputs
No. DPT
1
Parameters
Name
Short
description
Full
description
Index
134 2CDC508198D0211 Rev. A | AC/S 1.x.1
Abbr.
Any
A
Value
According to DPT Always
According to DPT Always
According to DPT Always
Name
Visible
Output
Always
Visible
Description
Default: E
Default: Input
Default: 0
Description