ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 200

®
ABB i-bus KNX
Parameters
Object name
Fan coil unit, fan manual
The module has this output socket if any option except None is selected for the
Outputs whether the current fan speed has been adjusted manually by a user or it was calculated automatically by the room
thermostat.
Signal value:
Fan coil unit, dew point sensor
The module has this output socket if any option except None is selected for the
selected for the Fan coil unit, dew point sensor parameter.
Outputs the signal value from the dew point sensor in the fan coil unit.
Signal value:
Fan coil unit, level sensor
The module has this output socket if any option except None is selected for the
selected for the Fan coil unit, level sensor parameter.
Outputs the signal value from the level sensor in the fan coil unit.
Signal value:
Radiator, valve
The data point type for the output socket is dependent on the settings in the module.
•
•
Outputs the position of the radiator valve.
200 2CDC508198D0211 Rev. A | AC/S 1.x.1
0 = Automatic
1 = Manual
0 = Off
1 = On
0 = Off
1 = On
If the On/Off option is selected for the
DPT 1.001
Signal value: 0 = Off, 1 = On
If the 0...100 % option is selected for the
DPT 5.001
Signal value: 0...100 %
Radiator parameter:
Radiator parameter:
Data type
DPT 1.011
Fan coil unit parameter.
DPT 1.001
Fan coil unit parameter and the Yes option is
DPT 1.001
Fan coil unit parameter and the Yes option is
DPT 1.001
DPT 5.001