Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
Operating mode
Options:
This parameter specifies whether the room thermostat outputs the operating mode (Comfort, Standby,
Economy, Building Protection) and whether this information is only to be output on the web user interface
or can also be changed by the user.
•
None: The operating mode is not used in the Room ASM and therefore not displayed on the web user
interface.
•
Display: The operating mode is displayed on the web user interface.
The current value is output on the ASM output socket and in a BACnet object.
•
Display+set (slave): The operating mode can be changed on the web user interface. The current value
is output on the ASM output socket and in a BACnet object.
This setting functions only with ABB and Busch-Jaeger devices with the old master/slave interface.
Window status
Options:
This parameter specifies whether the room's window status is displayed on the web user interface and is
to be output in the BACnet object and on the ASM output socket.
Presence detector
Options:
This parameter specifies whether the room's presence status is displayed on the web user interface and is
to be output in the BACnet object and on the ASM output socket.
188 2CDC508198D0211 Rev. A | AC/S 1.x.1
None
Display
Display+set (slave)
No (checkbox cleared)
Yes (checkbox selected)
No (checkbox cleared)
Yes (checkbox selected)
Advertisement
Table of Contents
