ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 162

®
ABB i-bus KNX
Parameters
•
And: The input values are combined using a logical AND operator.
Main data point type
Data point type
Definition of the data point type that is transferred between the interfaces.
You will find further information on the data point types in
The selection available may be restricted depending on the parameters above.
162 2CDC508198D0211 Rev. A | AC/S 1.x.1
Value 1 Value 2 Value used
0 0 0
1 0 0
0 1 0
1 1 1
chapter 4.7 Data point types.