Clock Parameter Page - ABB i-bus KNX AC/S 1.x.1 Series Product Manual

®
ABB i-bus KNX
Parameters
7.2.2.5

Clock parameter page

Clock synchronization source
Options:
•
NTP: The device clock is set using a time server in the IP network or the Internet. The device must be
able to communicate with the time server and access must not be blocked (e.g. by a firewall).
•
KNX: The device clock is set via the KNX bus. The KNX time server must be connected to the related
device group objects.
•
BACnet: The device clock is set via the BACnet bus. The device clock must be set via the BACnet
time synchronization function by the BACnet time server.
Selection of NTP option:
Time zone
Selection of the time zone in which the device is located.
NTP
KNX
BACnet
Dependent parameter(s):
NTP server
Information on the IP address or the NTP time server's domain.
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 63