ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 81

®
ABB i-bus KNX
Parameters
Function elements
ASM input socket (SOCKET IN)
Selects the ASM input socket based on the required main data point type. Values receives are forwarded
to the logic.
You can enter a unique name for the element in the Name field in the Properties window. The
corresponding ASM input socket in the Linking view also has this name.
Sending outputs
No. DPT Abbr. Name
1
2
Parameters
Name
Data subtype
Any A Output
Telegram
1 bit TE
received
Value
According to DPT
Visible Description
Always
Checkbox selected:
Every telegram received triggers a status send
Parametrizable pulse with the value 1/0.
The next calculation (usually after 200 ms) resets
the value to 0.
Visible
Always
Description
Selects the data point type
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 81