Table of Contents
Advertisement
®
ABB i-bus
KNX
Function
4.2.1
Automation functions
The devices contain pre-defined application-specific automation modules (ASM) for a comprehensive
HVAC automation solution, from central HVAC to room automation, and help you to achieve your energy
efficiency goals such as EN 15232 or LEED.
You can create your own automation modules using a graphic logic editor. In this way the straightforward
development of logic with simulation on the device or offline is possible.
The device can send the time from NTP (internet) or BACnet on the KNX bus and therefore operate as a
clock.
It is possible to record in the device the changes in any 50 values for up to 3 years.
You will find the description of the application-specific automation modules (ASM) from chapter 7.3.
This decentral device offers significantly higher reliability than automation functions in PC-based building
control systems.
4.2.2
Web user interface
The web user interface is generated automatically based on the application-specific automation modules
(ASM) and their parameterization, and can be used for building control as well as for commissioning and
maintenance tasks.
The web user interface is optimized for desktop PCs, notebooks and tablets with touch control. The image
displayed adjusts automatically to the terminal device.
30 2CDC508198D0211 Rev. A | AC/S 1.x.1
Advertisement
Table of Contents
