Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
7.4.3
Sockets
The data from other ASMs are read into your ASM using input sockets and used in the logic in your ASM.
The results of the logic are output to other ASMs via output sockets.
Create sockets by adding function elements of type SOCKET IN or SOCKET OUT. For each function
element of this type added, the corresponding socket appears with the name set and the data point type.
Overview of the ASM sockets for linking to other modules:
Input sockets
Object name
Socket IN
An input socket appears if you select a Socket IN function element in the configuration. The data point type is dependent on
the function selected.
Signal value:
Output sockets
Object name
Socket OUT
An output socket appears if you select a Socket OUT function element in the configuration. The data point type is dependent
on the function selected.
Signal value:
7.4.4
Group objects
No objects available
7.4.5
BACnet objects
No objects available
140 2CDC508198D0211 Rev. A | AC/S 1.x.1
Configuration-dependent
Configuration-dependent
Data type
Configuration-dependent
Data type
Configuration-dependent
Advertisement
Table of Contents
