Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
Object name
Floor heating, valve
The data point type for the output socket is dependent on the settings in the module.
•
•
Outputs the position of the floor heating valve.
Floor temperature sensor
The module has this output socket if the On/Off option or the 0...100 % option is selected for the
the Yes option is selected for the Floor temperature sensor parameter.
Outputs the floor temperature.
Signal value:
Cooling ceiling, valve
The data point type for the output socket is dependent on the settings in the module.
•
•
Outputs the position of the cooling ceiling valve.
Cooling ceiling, dew point alarm sensor
The module has this output socket if the On/Off option or the 0...100 % option is selected for the
and the Yes option is selected for the Cooling ceiling, dew point alarm sensor parameter.
Outputs the signal value from the dew point sensor in the cooling ceiling.
Signal value:
If the On/Off option is selected for the
DPT 1.001
Signal value: 0 = Off, 1 = On
If the 0...100 % option is selected for the
DPT 5.001
Signal value: 0...100 %
-273...670760 °C
If the On/Off option is selected for the
DPT 1.001
Signal value: 0 = Off, 1 = On
If the 0...100 % option is selected for the
DPT 5.001
Signal value: 0...100 %
0 = Off
1 = On
Floor heating
parameter:
Floor heating
parameter:
Cooling ceiling
parameter:
Cooling ceiling
parameter:
Data type
DPT 1.001
DPT 5.001
DPT 9.001
Floor heating
parameter and
DPT 1.001
DPT 5.001
DPT 1.001
Cooling ceiling
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 201
parameter
Advertisement
Table of Contents
