ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 97

®
ABB i-bus KNX
Parameters
Multiplexer, 2 to 1 (1-MUX)
Selects a value from two input values.
Inputs
No.
1
2
3
Outputs
No.
1
Parameters
Name
Send trigger
Function
If the selector has the value 1, input I
to the output.
Values received on unselected inputs are stored until the input is selected.
Whenever a telegram is received the output starts a recalculation independently if the value has changed.
DPT Abbr. Name
1 bit S Selector
Any I Input value
0
Any I Input value
1
DPT Abbr. Name
Any O Result
Value Visible
Yes
Always
No
Visible
Always
Always
Always
Visible
Always
Description
Checkbox:
Yes: The output sends when the selector receives a
value.
No: The output does not send when selector receives
a value.
is sent to the output. If the selector has the value 0, input I
1
Description
Description
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 97
is sent
0