Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
Object name
Cooling distribution circuit: Pump B repair switch status
The module has this BACnet output object if the Yes option is selected for the
selected for the
Outputs the contact position provided by the second pump repair switch.
Signal value:
Cooling distribution circuit: Valve control value
The module has this BACnet output object if the 3-way valve (mixing valve) option or the 2-way valve option is selected for the
Valve type
Outputs the valve control value for the cooling distribution circuit. This value is received from the cooling distribution circuit
controller linked via the related module group object.
Signal value:
Cooling distribution circuit: Valve override disable/enable
The module has this BACnet output object if the 3-way valve (mixing valve) option or the 2-way valve option is selected for the
Valve type
Outputs whether the override of the cooling distribution circuit's valve is active or inactive.
Signal value:
Cooling distribution circuit: Valve override control value
The module has this BACnet output object if the 3-way valve (mixing valve) option or the 2-way valve option is selected for the
Valve type
Outputs the value used to override the cooling distribution circuit's valve if the override is active.
Signal value:
Cooling distribution circuit: Status Valve purge
The module has this BACnet output object if the 3-way valve (mixing valve) option or the 2-way valve option is selected for the
Valve type
Outputs the status as to whether the cooling distribution circuit controller is actually undertaking a valve purge. This value is
received from the cooling distribution circuit controller linked via the related module group object.
Signal value:
Display pump repair switch status
0 = Inactive
1 = Active
parameter.
0...100%
parameter and the Yes option is selected for the
0 = Disabled
1 = Enabled
parameter and the Yes option is selected for the
0...100 %
parameter and the Yes option is selected for the
0 = Inactive
1 = Active
Object type
Binary value
Double pump
parameter.
Analog value
Binary value
Valve override disable/enable
Analog value
Valve override disable/enable
Binary value
Status Valve purge
parameter.
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 367
Unit
COV send
condition
-
-
parameter and the Yes option is
% (98)
1.0
-
-
parameter.
% (98)
1.0
parameter.
-
-
Advertisement
Table of Contents
