ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 285

®
ABB i-bus KNX
Parameters
Object name
Heating distribution circuit: Valve override control value
The module has this BACnet output object if the 3-way valve (mixing valve) option or the 2-way valve option is selected for the
Valve type
Outputs the value used to override the heating distribution circuit's valve if the override is active.
Signal value:
Heating distribution circuit: Status Valve purge
The module has this BACnet output object if the 3-way valve (mixing valve) option or the 2-way valve option is selected for the
Valve type
Outputs the status as to whether the heating distribution circuit controller is actually undertaking a valve purge. This value is
received from the heating distribution circuit controller linked via the related module group object.
Signal value:
parameter and the Yes option is selected for the
0...100 %
parameter and the Yes option is selected for the
0 = Inactive
1 = Active
Object type
Analog value
Valve override disable/enable parameter.
Binary value
Status Valve purge parameter.
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 285
Unit COV send
condition
% (98) 1.0
- -