Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
Freely configurable
The interfaces can be parameterized as required using this template.
It is possible to parameterize several interfaces (KNX, BACnet, web user interface) as an input at the
same time. Independent of the interface, the last value received then applies for all interfaces.
ASM socket
Options:
This parameter specifies whether the ASM has an input socket or an output socket.
•
Input: The ASM has an input socket. As a consequence the options that can be selected for the other
interfaces are restricted to Output and Display.
For system-related reasons, the values from other ASMs are continuously present on the input socket,
while input values from KNX, BACnet and the web user interface are transmitted dependent on the
event. As such if several interfaces are active at the same time, the last value cannot be identified
unambiguously. For this reason the possible selections for the following interface parameters are
restricted.
•
Output: The ASM has an output socket. The options that can be selected for the other interfaces are
not restricted.
Selection of Input option:
Input
Output
Dependent parameter(s)
Aggregate function
Options:
None
Max
Min
Avg
Or
And
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 167
Advertisement
Table of Contents
